==========================================
IMPORTANT: PLEASE READ BEFORE INSTALLATION
==========================================

Creative Professional / Xmidi 1x1/2x2
Thank you for purchasing the E-MU Xmidi 1x1/2x2
Should you encounter any difficulty with the installation, 
please call E-MU Customer Support at:

North America: 405-743-0464 

Europe (10:30-19:00 CET)
English:     +353 1 433 3201
French:      +353 1 433 3221
German:      +353 1 438 0001

Japan: 	http://japan.creative.com/support/contact/

You should be aware of the following information before 
installing the Xmidi 1x1/2x2 and device drivers.

===========================
Register Your Xmidi 1x1/2x2
===========================

Register your product to enjoy benefits such as driver 
downloads, knowledge base FAQs and email/phone call support. 

=====================
Notes on Installation
=====================

Windows Users:

- In order for the Xmidi 1x1/2x2 to function properly, you MUST
install the drivers located on the included CD.

- IF AT ANY TIME DURING INSTALLATION YOU SEE NO RESPONSE: Use 
the Alt-Tab feature to select other applications. One of them 
may be the Microsoft Digital Signature warning. It is possible 
for this warning to appear behind the installation screen.

- During installation, when you encounter the "Windows Logo 
Testing" screen, choose “Continue Anyway” See the note below.

- Make sure you have the latest Windows Service Packs from 
Microsoft (Windows XP - SP 2 or higher).

===============================
Note About Windows Logo Testing
===============================

When you install the Xmidi 1x1/2x2 drivers, you will see a 
dialog box that informs you that the driver has not passed 
Windows Logo testing. However, Xmidi 1x1/2x2 drivers have 
been rigorously tested using the same test
procedures that a signed driver requires, and pass in all 
important categories, including those that measure the 
relative stability of the driver. So, it is perfectly
safe to install these drivers on your computer.

================================
DO NOT Use an unpowered USB Hub
================================

If you plug your Xmidi 1x1/2x2 into a USB hub, the hub must 
provide DC Power for the Xmidi 1x1/2x2 to properly function.

=============================================
Download the latest Software FROM WWW.EMU.com
=============================================

Check www.emu.com for the latest Xmidi 1x1/2x2 software.

============
Known Issues
============

Many of these issues may already be resolved. Please visit 
http://www.emu.com to see if a software update is already 
available.
 
If you use a powered hub and your Xmidi 1x1/2x2 appears as an 
unrecognized device, try connecting the Xmidi 1x1/2x2 directly 
to your computer, or using a different powered hub. 

===================
California Prop. 65
===================

WARNING: The cord(s) included with this product may contain 
chemicals known to the State of California to cause cancer and 
birth defects or other reproductive harm. Wash hands after 
handling.

=========
Copyright
=========

Copyright (c) 2006 E-MU Systems. All rights reserved.