General

			Sample Rates: 44.1, 48, 88.2, 96, 176.4, 192kHz from internal crystal (no sample rate conversion)*
			Bit Depth: 24-bit I/O, 32-bit processing
			USB 2.0 Hi-Speed
			- Full 24-bit resolution at all sample rates - Stereo in, stereo out at all sample rates
			Zero-latency direct hardware monitoring (disabled at 176.4-192kHz)
			Windows drivers: ASIO2 and WDM
			Macintosh driver: Apple CoreAudio
			Anti-Pop speaker protection minimizes noise during power on/off
			Ultra-low jitter clock subsystem: < 100ps RMS

Combo Preamplifiers (2)

			Type:
			- (1) Ultra-low noise combo preamplifier with Mic/Hi-Z/line inputs - (1) Combo preamplifier with Hi-Z/line balanced input
			A/D converter: AK5385
			Max Level: +6.5dBV bal/unbal (+8.7 dBu)
			Frequency Response (min gain, 20Hz-20kHz): +0.0/-0.07dB
			Dynamic Range (A-weighted, 1kHz, min gain): 113dB
			Signal-to-Noise Ratio (A-weighted, min gain): 113dB
			THD+N (1kHz at - 1dBFS, min gain): -103dB (.0007%)
			Ultra-low noise preamplifier (Mic/Hi-Z/line inputs)
			- Input Impedance: 1.5Kohm - EIN (20Hz-20kHz, 150ohm, unweighted): -127dBu
			Combo preamplifier with Hi-Z/line balanced input
			- Input Impedance: 1Mohm

Analog Line Outputs (2)

			Type: Balanced, AC-coupled, 2-pole low-pass differential filter
			D/A converter: CS4392
			Max Level: 6.7 dBV (unbalanced)
			Frequency Response (20Hz - 20kHz): 0.00/-0.01dB
			Dynamic Range (1kHz, A-weighted): 111dB
			Signal-to-Noise Ratio (A-weighted): 112dB
			THD+N (1kHz at -1dBFS): -98dB (.0013%)
			Stereo Crosstalk (1kHz at -1dBFS): <-120dB

Headphone Amplifier

			Type: Class-A power amplifier
			D/A converter: CS4392 (shared with Line Out)
			Gain Range: 60dB
			Maximum Output Power: 16mW
			Output Impedance: 22ohms
			Frequency Response (20Hz-20kHz): +0.02/-0.08dB
			Dynamic Range (A-weighted): 110dB
			Signal-to-Noise Ratio (A-weighted): 108dB
			THD+N (1kHz, max gain): 300ohm load: -98dB (.0013%)
			Stereo Crosstalk (1kHz at -1dBFS, 300 ohm load): <-91dB

Synchronization

Internal crystal sync at 44.1, 48, 88.2, 96, 176.4, 192kHz

* Macintosh analog operation up to 96kHz only at this time.

Retail Box Contents

			E-MU 0202 USB 2.0 AudioPod
			USB cable (2 meters)
			Quick Start installation guide
			E-MU Software/Manual CD-ROM (Windows/Macintosh) - Windows XP and x64 Drivers - Macintosh OS X Drivers - Owner's Manual and Tutorials
			Acoustica MixCraft LE CD-ROM (Windows)

Minimum System Requirements

Windows:
			Intel® or AMD® processor - 1.2 GHz or faster
			Intel, AMD or 100% compatible motherboard & chipset
			Microsoft® Windows® XP (SP 2 or greater) or Windows XP x64
			1 available (Hi-speed) USB 2.0 port**
			256MB System RAM
			950MB of free hard disk space for full installation
			CD-ROM/CD-RW or DVD-ROM drive required for software installation
			XVGA Video (1024 X 768)
Macintosh:
			Apple® Macintosh® 800 MHz G4-compatible or Intel-based processor
			Apple Macintosh OS X (10.4.3 or greater)
			1 available (Hi-speed) USB 2.0 port**
			512MB System RAM
			500MB of free hard disk space for full installation
			CD-ROM/CD-RW or DVD-ROM drive required for software installation
			XVGA Video (1024 X 768)

** When connecting the 0202 USB to a USB 1.1 port on a Windows PC, performance will be limited to 16-bit and 44.1/48kHz recording and playback. Macintosh support limited to USB 2.0 ports only.